how to lift a golf cart without a kit?

Are you looking for ways to lift a golf cart without a kit? If so, then you’ve come to the right place! Lifting a golf cart without a kit is possible and doesn’t require any special tools or parts. All it takes is some know-how and basic resources. With just a few simple steps, you can easily lift your golf cart without having to purchase an expensive kit.

Lifting your golf cart without a kit requires two main components: jacks and blocks of wood. First, use the jacks to raise the front end of the vehicle off the ground until it’s high enough for you to slide blocks of wood underneath. Then, slowly lower the jacks while making sure that they are evenly distributed on both sides of the vehicle. Finally, once the blocks are in place, raise up the jacks again until they reach their highest point with your golf cart securely lifted off the ground.

how to lift a golf cart without a kit
Photo Credit: golfcartsforsale

Key Takeaways

  • Always ensure you have the right safety equipment on hand before attempting to lift a golf cart.
  • Use appropriate jacks and stands for the job, making sure they are rated for the weight of your golf cart.
  • Utilize jack stands to support the lifted portion of the golf cart while working underneath it.
  • Make sure to use caution when lifting and maneuvering a heavy object like a golf cart; always have an assistant available if necessary.

Lifting a Golf Cart without a Kit

Lifting a golf cart without a kit is possible, and can be done with the right tools. It’s important to understand the basics of lifting before attempting this task.

First, you’ll need to find the correct jacking points on your golf cart. These are typically located near the frame or axle, depending on your model. Jacks should never be placed directly under any plastic or fiberglass components as they could cause damage.

Next, you’ll need to use either a floor jack or bottle jack for your lift. Floor jacks are best used when lifting from the frame while bottle jacks work better when lifting from an axle point. Make sure that whatever type of jack you choose is rated for at least twice as much weight as your golf cart weighs in order to ensure safety and stability during the lift process.

Once everything is in place, slowly raise your golf cart until it’s off the ground enough for you to slide blocks underneath it for extra support and stability during repairs or maintenance tasks. Be sure not to go too high – just enough so that you can comfortably get underneath it safely!

Necessary Tools and Parts for DIY Golf Cart Lift

If you are a DIY enthusiast who wants to lift your golf cart, then you must understand the necessary tools and parts for the job. Here is a guide on what you need to know before starting this project:

  1. Jacks – To lift your golf cart, you will need two jacks that can support its weight. Make sure they are strong enough and in good condition.
  2. Lifting Blocks – You’ll also need blocks or stands that can be placed under the frame of the golf cart for added stability while it is lifted off the ground.
  3. Wrenches – Depending on how much access you have underneath your golf cart, wrenches may be needed to loosen any bolts or nuts holding down components such as wheels or suspension arms.
  4. Socket Sets – If your golf cart has a lot of hardware connecting components together, then having socket sets with different sizes will make it easier to remove them quickly and efficiently without damaging anything in the process.
  5. Torque Wrench – A torque wrench is essential when reassembling components after lifting your golf cart as it ensures all fasteners are tightened properly so nothing comes loose during use later on down the line.

Step-by-Step Guide to Installing a DIY Golf Cart Lift

  1. Read the instructions that come with the lift kit thoroughly before beginning installation. Make sure you understand all of the steps before proceeding.
  2. Place your golf cart on level ground and make sure it is securely in place using jack stands or other stabilizing equipment.
  3. Install the brackets onto your golf cart frame according to the instructions included with the lift kit. This may involve drilling holes into your frame for mounting screws/bolts or welding them in place if required by your model of lift kit.
  4. Attach the arms of the lift to each side of your vehicle using either bolts or welds depending on what is recommended by your specific brand/model of lift kit instructions.
    6 Connect any cables/wires as needed for power and control purposes according to instructions included with your specific model of lift kit .

Common Pitfalls When Lifting a Golf Cart without a Kit

Lifting a golf cart without a lift kit can be dangerous and lead to costly repairs. Here are some common pitfalls to avoid when attempting to lift a golf cart without the proper equipment:

Not using jack stands

Jack stands provide support for the vehicle while it is raised. Without them, you risk damaging your vehicle or worse, injuring yourself or someone else.

Improperly positioning the jacks

Make sure that you place your jacks in the correct locations on the frame of your golf cart before raising it off the ground. This will help ensure stability and prevent damage from occurring during lifting.


When lifting with jacks, make sure not to overload them with weight as this could cause them to fail and result in serious injury or damage to your vehicle and property.

Benefits of Installing Your Own DIY Golf Cart Lift

Installing your own DIY golf cart lift can be a great way to save money and time. Here are some of the benefits of doing so:

Cost savings

Installing a DIY golf cart lift will cost much less than purchasing a pre-made kit, as you won’t have to pay for installation or labor costs. You’ll also save on parts since you can source them yourself at lower prices.


With a DIY lift, you have the freedom to customize it exactly how you want it – from the size and shape of the frame to its paint color and accessories. This allows you to create something that perfectly fits your needs and style preferences.

Easy maintenance

Since you built it yourself, maintaining your golf cart lift should be relatively easy compared to having someone else do it for you. This means less time spent waiting for repairs or replacements and more time enjoying your ride!


What tools are necessary to lift a golf cart without a kit?

To lift a golf cart without a kit, you will need at least two jack stands and either an automotive floor jack or an engine hoist. You may also find it helpful to have additional items such as wheel chocks, axle stands, and chains or straps for extra security.

How can I ensure that the golf cart is stable when lifting it?

Before attempting to lift your golf cart, make sure that all four wheels are securely chocked so that the vehicle does not move while being lifted. Additionally, use jack stands on both sides of the vehicle for added stability and safety during the lifting process.

Is there anything else I should consider before lifting my golf cart?

Yes! Make sure that you check your owner’s manual for any specific instructions related to lifting your golf cart model safely and correctly. Additionally, always wear protective gear such as gloves and safety glasses when working with heavy machinery like jacks and hoists.

Similar Posts